MATERIAL:
High performance, 100% solids, epoxy phenolic resin with proprietary alkali curing agents. Formulated as highbuild
system designed to be spray applied in a single coat or three (3) coat roll-on process. Reinforced with
proprietary additives for physical strength, AQUA GUARD demonstrates superior adhesion to cementitious and
fiberglass surfaces.

PRODUCT USE:
Chemical-resistant protective coating for pool surfaces and other aquatic features such as fountains, spas, and
ponds.

SURFACE PREPARATION:

Concrete - acid each and neutralize or pressure wash depending on severity of surface degradation. Repair and
restore concrete as necessary. Plaster surfaces will require a sealer/primer for reconditioning prior to application
of the topcoat.

Fiberglass - grind or abrade with a coarse grain emery grinding disc to achieve an adequate surface profile or
anchor pattern.

PHYSICAL PROPERTIES:
Flexural Strength ..............................................................8-10,000 psi
Compressive Strength .....................................................12-14,000 psi
Tensile Strength .....................................................................5,000 psi
Bond Strength ........................................................................2,000+ psi

RECOMMENDED THICKNESS:
40 - 60 Mils., DFT Spray-on
20 - 30 Mils., DFT Roll-on

COLORS: Standard Blue, Gulfstream Blue, Onyx, and White.

COVERAGE (actual):
(spray) Approximately 125 square feet/unit @ 60 mils.
(roller) Approximately 250 square feet/unit @ 30 mils.

DRYING TIME:
Tack Free - 2 to 4 hours at 77° F
To Handle - 4 to 6 hours at 77° F

CURING TIME: 24 Hours at 77° F and/or until a minimum Barcol Hardness of 65 is obtained.